A plumbing leak is one of the most annoying problems for any homeowner. Not only does it cause damage to your property, but it also significantly disrupts your budget!

In the United States alone, the average family can waste 180 gallons per week due to household leaks. Before matters get worse, it is best to stop leaks in their tracks by detecting them early on. You might want to consider hiring a plumber in OKC who can offer the best plumbing services. Make sure you engage the services of a company with state-of-the-art leak detection equipment to accurately and quickly locate the source of leaks in your home.

As a homeowner, you may want to proactively conduct a leak detection and location yourself, particularly for simple plumbing leak cases. Here are some tips on how to detect hidden plumbing leaks.

Check your toilet.

This is the place you need to check first. Do this by removing the lid from the tank behind your toilet and listen for any hissing sound. A noticeable hissing sound indicates a leak. Another method is to put red food coloring into your toilet’s tank. A few drops are all you need. If the color fades to pink after a few minutes, you may have a leaky flapper.

Check all possible leak points inside your home.

Other several possible leak points inside your home are the showerheads, faucets, kitchen sinks, and any other faucet. See if you notice any dripping.

Use a screwdriver to listen and detect leaks.

You can use this technique in a lot of places but particularly on hose bibs. Take a screwdriver and place the metal part on the metal portion of the hose bib. Next, take your thumb’s knuckle and put it at the other end of the screwdriver. Place your ear on your knuckle. You’ll be able to hear a leak if there’s any. This technique works like a stethoscope.

Check your meter line.

Before anything else, make sure to shut off the shut-off valve temporarily and then remove the lid from the meter. Then, watch the dial. See if the meter is still turning. If it is, there is a leak between your house and the meter. It can also be a leaking valve. If you can locate where the leak is, contact a professional plumber immediately to have it fixed.

Check the hot water tank.

Check the pressure relief valve of your hot water tank. Remove the drain pipe to find the leak. Listen to the same hissing sound to detect a leak. Another way of detecting hidden plumbing leaks in your hot water tank is to look for sitting water near the bottom of the tank. Look out for moisture on the bottom of the discharge tube, which indicates a leak.

Remember that plumbing leaks in your home aren’t only an inconvenience; they’re avoidable and repairable issues. For all your plumbing needs in Oklahoma, contact Southwest Mechanical Contractors today!

Leave a Reply